Availability: | |
---|---|
Quantity: | |
KEYUAN
Blowing / Blow machine Features:
1. Stable performance with advanced PLC.
2. Automatic preform conveyer to save human cost.
3. Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production.
4. High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
5. High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
6. Introduce the air cylinder to avoid contamination and noise.
7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8. Strong clamping force with high pressure and double crank links to lock the mould.
9. Customized bottle mold design.
10. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process. Easy installation and starting.
11. Contamination is avoided for the bottle body.
12. Ideal effect of the chilling with the chilling system.
13. Low rejection rate: Less than 0.2 percent.
14. Safereliable and unique design of the position of valve to make the pneumatic diagram in the machine easier to understand.
Technical Parameter:
Automatic High Speed Energy Saving Type Machine
Model | PM-K4 | PM-K6 | PM-K8 | PM-K12 | |
Bottle type specification | Cavity | 4 | 6 | 8 | 12 |
Max.volume | 2L | 2L | 2L | 0.75L | |
Bottle mouth maximum overall diameter | 28-38mm | 28-38mm | 28-38mm | 28-38mm | |
Bottle biggest diameter | 100mm | 100mm | 100mm | 100mm | |
Bottle maximum height | 330mm | 330mm | 330mm | 330mm | |
Capacity | Theory output | 6000-8500BPH | 9000-12000BPH | 14000BPH | 24000BPH |
Power specification | Light tube quantity | 16pcs | 32pcs | 32pcs | 32pcs |
Light tube power | 1.25KW | 1.25KW | 1.5KW | 1.75kw | |
Maximum heating power | 20KW | 40kw | 48KW | 56kw | |
All electric machine installation | 29KW | 49kw | 65KW | 71kw | |
Actual consumption | 30%--60% | 30%--60% | 30%--60% | 30%--60% | |
Air pressure specification | Work pressure | 5-6kg/cm2 | 5-6kg/cm2 | 5-6kg/cm2 | 5-6kg/cm2 |
Blow bottle pressure | 25-45kg/cm2 | 25-45kg/cm2 | 25-45kg/cm2 | 25-45kg/cm2 | |
Higher -pressure gas consumption | 6000Ltr/min | 8000Ltr/min | 12000Ltr/min | 24000Ltr/min | |
Frozen water specification | Work pressure | 5-6 kg/cm2 | 5-6 kg/cm2 | 5-6 kg/cm2 | 5-6 kg/cm2 |
Temperature range | 10ºC | 10ºC | 10ºC | 10ºC | |
Consumption | 8000kcal/hr | 8000kcal/hr | 12000kcal/hr | 12000kcal/hr | |
Forzen water flow | 88L/min | 120L/min | 150L/min | 220L/min | |
Machine specification | Machine size | 3.6x1.6x1.9 | 4.8x1.8x1.9 | 5.8x1.6x1.9 | 7.6x1.6x1.9 |
Machine weight | 4.3tons | 6.1tons | 7.5tons | 11.5tons |
Automatic Type Machine
Model | Item | PM-A2 | PM-A4 | PM-A6 | PM-9000 | PM-12000 |
Productivity | Depend on bottle design | 1800-2200PCS/H | 3500-4200PCS/H | 5500-6300PCS/H | 8000-9200PCS/H | 11000-12200PCS/H |
Product type | Volume | 0.1-2.0L | 0.1-2.0L | 0.1-2.0L | 0.1-0.75L | 0.1-0.75L |
Body diameter | ≤100mm | ≤100mm | ≤100mm | ≤100mm | ≤100mm | |
Height | ≤310mm | ≤310mm | ≤330mm | ≤330mm | ≤330mm | |
Neck diameter | ≤38mm | ≤38mm | ≤38mm | ≤38mm | ≤38mm | |
Mold | Cavity | 2 | 4 | 6 | 6 | 9 |
Mold thickness | 240mm | 240mm | 240mm | 240mm | 240mm | |
Mold volume | 260*240*370mm | 510*240*360mm | 640*240*360mm | 640*240*360mm | 840*240*360mm | |
Main machine power | Electrical source power | 380V/220V 50/60Hz | 380V/220V 50/60Hz | 380V/220V 50/60Hz | 380V/220V 560/60Hz | 380V/220V 560/60Hz |
3Phase | 3Phase | 3Phase | 3Phase | 3Phase | ||
Rated power | 25kw | 49kw | 73kw | 97kw | 127kw | |
Really use power | 6.5kw | 13kw | 25kw | 32kw | 52kw | |
Air system | HP air compressor | 1.6m³/min3.0MPa | 3.0m³/min3.0MPa | 6.0m³/min3.0MPa | 6.0m³/min3.0MPa | 8.0m³/min3.0MPa |
LP air compressor | 1.0m³/min1.0MPa | 1.6m³/min1.0MPa | 2.0m³/min1.0MPa | 2.0m³/min1.0MPa | 2.0m³/min1.0MPa | |
Air tank | 0.6m³3.0MPa | 0.6m³3.0MPa | 1.0m³3.0MPa | 1.0m³3.0MPa | 1.0m³3.0MPa | |
Air dryer | 1.0m³/min3.0MPa | 2.0m³/min3.0MPa | 6.0m³/min3.0MPa | 6.0m³/min3.0MPa | 8.0m³/min3.0MPa | |
Cooling water | Water Chiller | 3HP | 3HP | 5HP | 5HP | 8HP |
Machine | Size(L*W*H) | 1900*1280*1930mm | 1900*1860*1930mm | 4100*1400*1800mm | 4100*2200*1800mm | 4700*2600*1800mm |
Weight | 2000kg | 3600kg | 4200kg | 4800kg | 5700kg | |
Preform unscrambler | Size(L*W*H) | 2000*950*2480mm | 2000*950*2480mm | 2000*950*2480mm | 2000*950*2480mm | 2000*950*2480mm |
Weight | 500kg | 500kg | 500kg | 500kg | 500kg |
UNIT | PM-12 | PM-8Y | PM-1500 | PM-1-20 | ||
Theoretical output | PCS/h | 500 | 900 | 1800 | 90 | |
Product | Volume | L | 5.0 | 2.0 | 2.0 | 20 |
Max. Height | mm | 360 | 360 | 360 | 550 | |
Max. Diameter | mm | 120 | 105 | 105 | 300 | |
Mould | Number of cavities | / | 1 | 2 | 4 | 1 |
Mould piate dimension(L*H) | mm | 490*470 | 490*405 | 490*405 | 620*620 | |
Mould thickness | mm | 250 | 220 | 220 | 380 | |
Mould opening stroke | mm | 220 | 180 | 180 | 380 | |
Electrical | Power | / | 220_380V/50_60Hz | 220_380V/50_60Hz | 220_380V/50_60Hz | 220_380V/50_60Hz |
Total power | KW | 11 | 11 | 21 | 36 | |
Heating power | KW | 10 | 10 | 20 | 37 | |
Machine | Main body dimension(L*W*H) | M | 1.5*0.65*2.0 | 1.5*0.65*2.0 | 1.5*0.65*2.0 | 2.1*0.75*1.6 |
Main body weight | Kg | 600 | 550 | 550 | 900 | |
Pre-heater(L*W*H) | M | 1.5*0.65*1.5 | 1.4*0.65*1.5 | 1.8*0.65*1.5 | 2.7*0.7*1.6 | |
Blowing / Blow machine Features:
1. Stable performance with advanced PLC.
2. Automatic preform conveyer to save human cost.
3. Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production.
4. High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
5. High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
6. Introduce the air cylinder to avoid contamination and noise.
7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8. Strong clamping force with high pressure and double crank links to lock the mould.
9. Customized bottle mold design.
10. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process. Easy installation and starting.
11. Contamination is avoided for the bottle body.
12. Ideal effect of the chilling with the chilling system.
13. Low rejection rate: Less than 0.2 percent.
14. Safereliable and unique design of the position of valve to make the pneumatic diagram in the machine easier to understand.
Technical Parameter:
Automatic High Speed Energy Saving Type Machine
Model | PM-K4 | PM-K6 | PM-K8 | PM-K12 | |
Bottle type specification | Cavity | 4 | 6 | 8 | 12 |
Max.volume | 2L | 2L | 2L | 0.75L | |
Bottle mouth maximum overall diameter | 28-38mm | 28-38mm | 28-38mm | 28-38mm | |
Bottle biggest diameter | 100mm | 100mm | 100mm | 100mm | |
Bottle maximum height | 330mm | 330mm | 330mm | 330mm | |
Capacity | Theory output | 6000-8500BPH | 9000-12000BPH | 14000BPH | 24000BPH |
Power specification | Light tube quantity | 16pcs | 32pcs | 32pcs | 32pcs |
Light tube power | 1.25KW | 1.25KW | 1.5KW | 1.75kw | |
Maximum heating power | 20KW | 40kw | 48KW | 56kw | |
All electric machine installation | 29KW | 49kw | 65KW | 71kw | |
Actual consumption | 30%--60% | 30%--60% | 30%--60% | 30%--60% | |
Air pressure specification | Work pressure | 5-6kg/cm2 | 5-6kg/cm2 | 5-6kg/cm2 | 5-6kg/cm2 |
Blow bottle pressure | 25-45kg/cm2 | 25-45kg/cm2 | 25-45kg/cm2 | 25-45kg/cm2 | |
Higher -pressure gas consumption | 6000Ltr/min | 8000Ltr/min | 12000Ltr/min | 24000Ltr/min | |
Frozen water specification | Work pressure | 5-6 kg/cm2 | 5-6 kg/cm2 | 5-6 kg/cm2 | 5-6 kg/cm2 |
Temperature range | 10ºC | 10ºC | 10ºC | 10ºC | |
Consumption | 8000kcal/hr | 8000kcal/hr | 12000kcal/hr | 12000kcal/hr | |
Forzen water flow | 88L/min | 120L/min | 150L/min | 220L/min | |
Machine specification | Machine size | 3.6x1.6x1.9 | 4.8x1.8x1.9 | 5.8x1.6x1.9 | 7.6x1.6x1.9 |
Machine weight | 4.3tons | 6.1tons | 7.5tons | 11.5tons |
Automatic Type Machine
Model | Item | PM-A2 | PM-A4 | PM-A6 | PM-9000 | PM-12000 |
Productivity | Depend on bottle design | 1800-2200PCS/H | 3500-4200PCS/H | 5500-6300PCS/H | 8000-9200PCS/H | 11000-12200PCS/H |
Product type | Volume | 0.1-2.0L | 0.1-2.0L | 0.1-2.0L | 0.1-0.75L | 0.1-0.75L |
Body diameter | ≤100mm | ≤100mm | ≤100mm | ≤100mm | ≤100mm | |
Height | ≤310mm | ≤310mm | ≤330mm | ≤330mm | ≤330mm | |
Neck diameter | ≤38mm | ≤38mm | ≤38mm | ≤38mm | ≤38mm | |
Mold | Cavity | 2 | 4 | 6 | 6 | 9 |
Mold thickness | 240mm | 240mm | 240mm | 240mm | 240mm | |
Mold volume | 260*240*370mm | 510*240*360mm | 640*240*360mm | 640*240*360mm | 840*240*360mm | |
Main machine power | Electrical source power | 380V/220V 50/60Hz | 380V/220V 50/60Hz | 380V/220V 50/60Hz | 380V/220V 560/60Hz | 380V/220V 560/60Hz |
3Phase | 3Phase | 3Phase | 3Phase | 3Phase | ||
Rated power | 25kw | 49kw | 73kw | 97kw | 127kw | |
Really use power | 6.5kw | 13kw | 25kw | 32kw | 52kw | |
Air system | HP air compressor | 1.6m³/min3.0MPa | 3.0m³/min3.0MPa | 6.0m³/min3.0MPa | 6.0m³/min3.0MPa | 8.0m³/min3.0MPa |
LP air compressor | 1.0m³/min1.0MPa | 1.6m³/min1.0MPa | 2.0m³/min1.0MPa | 2.0m³/min1.0MPa | 2.0m³/min1.0MPa | |
Air tank | 0.6m³3.0MPa | 0.6m³3.0MPa | 1.0m³3.0MPa | 1.0m³3.0MPa | 1.0m³3.0MPa | |
Air dryer | 1.0m³/min3.0MPa | 2.0m³/min3.0MPa | 6.0m³/min3.0MPa | 6.0m³/min3.0MPa | 8.0m³/min3.0MPa | |
Cooling water | Water Chiller | 3HP | 3HP | 5HP | 5HP | 8HP |
Machine | Size(L*W*H) | 1900*1280*1930mm | 1900*1860*1930mm | 4100*1400*1800mm | 4100*2200*1800mm | 4700*2600*1800mm |
Weight | 2000kg | 3600kg | 4200kg | 4800kg | 5700kg | |
Preform unscrambler | Size(L*W*H) | 2000*950*2480mm | 2000*950*2480mm | 2000*950*2480mm | 2000*950*2480mm | 2000*950*2480mm |
Weight | 500kg | 500kg | 500kg | 500kg | 500kg |
UNIT | PM-12 | PM-8Y | PM-1500 | PM-1-20 | ||
Theoretical output | PCS/h | 500 | 900 | 1800 | 90 | |
Product | Volume | L | 5.0 | 2.0 | 2.0 | 20 |
Max. Height | mm | 360 | 360 | 360 | 550 | |
Max. Diameter | mm | 120 | 105 | 105 | 300 | |
Mould | Number of cavities | / | 1 | 2 | 4 | 1 |
Mould piate dimension(L*H) | mm | 490*470 | 490*405 | 490*405 | 620*620 | |
Mould thickness | mm | 250 | 220 | 220 | 380 | |
Mould opening stroke | mm | 220 | 180 | 180 | 380 | |
Electrical | Power | / | 220_380V/50_60Hz | 220_380V/50_60Hz | 220_380V/50_60Hz | 220_380V/50_60Hz |
Total power | KW | 11 | 11 | 21 | 36 | |
Heating power | KW | 10 | 10 | 20 | 37 | |
Machine | Main body dimension(L*W*H) | M | 1.5*0.65*2.0 | 1.5*0.65*2.0 | 1.5*0.65*2.0 | 2.1*0.75*1.6 |
Main body weight | Kg | 600 | 550 | 550 | 900 | |
Pre-heater(L*W*H) | M | 1.5*0.65*1.5 | 1.4*0.65*1.5 | 1.8*0.65*1.5 | 2.7*0.7*1.6 | |
Name:Infrared lamp heating system:
Adopt infrared lamp heating, strong penetration, preform rotation heating, track revolution, heating evenly, fast and reliable; Heating lamp, reflector width and height can be adjusted to suit preform heating of different structure, with automatic temperature-removal device to ensure the constant temperature of oven.
Name:Servo clamping and stretching system for bottle molding
Blow the bottles according to the designed bottle molds,it adopts servo motor using for stretching to ensure the bottle blowing speed faster and more stable bottle quality.There are two cranks to control the clamping system which can shorten the mold-clamping time and improve productivity, and also solve the swelling mold and big joint line problem with the effect of pressurize plate.
Name: Auxiliary equipment
Complete Air compressor,filter,air tank to supply the machine with required gas.
Name:Infrared lamp heating system:
Adopt infrared lamp heating, strong penetration, preform rotation heating, track revolution, heating evenly, fast and reliable; Heating lamp, reflector width and height can be adjusted to suit preform heating of different structure, with automatic temperature-removal device to ensure the constant temperature of oven.
Name:Servo clamping and stretching system for bottle molding
Blow the bottles according to the designed bottle molds,it adopts servo motor using for stretching to ensure the bottle blowing speed faster and more stable bottle quality.There are two cranks to control the clamping system which can shorten the mold-clamping time and improve productivity, and also solve the swelling mold and big joint line problem with the effect of pressurize plate.
Name: Auxiliary equipment
Complete Air compressor,filter,air tank to supply the machine with required gas.
Brand Name
Name | Brand |
PLC controller | Delta TAIWAN |
Touch screen | Delta TAIWAN |
Clamping servo | Delta TAIWAN |
Stretch servo | Delta TAIWAN |
Range servo | Delta TAIWAN |
Bottle out servo | Delta TAIWAN |
Main chain servo | Delta TAIWAN |
Cylinder | FST Germany |
Magnet valve | FST Germany |
Photoelectric switch | OMRON Japan |
Proximity switch | OMRON Japan |
Contactor | SCD France |
Switch power | SCD France |
Sensor | Sutonics Korea |
Brand Name
Name | Brand |
PLC controller | Delta TAIWAN |
Touch screen | Delta TAIWAN |
Clamping servo | Delta TAIWAN |
Stretch servo | Delta TAIWAN |
Range servo | Delta TAIWAN |
Bottle out servo | Delta TAIWAN |
Main chain servo | Delta TAIWAN |
Cylinder | FST Germany |
Magnet valve | FST Germany |
Photoelectric switch | OMRON Japan |
Proximity switch | OMRON Japan |
Contactor | SCD France |
Switch power | SCD France |
Sensor | Sutonics Korea |