It is the most stable two-step automatic stretch PET bottle blow moulding machine.It has four cavities and the maximum capacity of the bottle is 2L.The capacity can be 6800-8000BPH, It can blow bottles in shapes:Carbonated, mineral, pesticide, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET etc.
1)High Automatization
2).High Intelligence:The machine can be controlled through touch screen and running status is shown on it.
3).High Quanlity:Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
4).High Speed:6500- 8000BPH(4-cavity)
5).No Contamination:Closed production zone, good self-lubrication system avoid contamination.
6).Low Cost:Low consumption of electricity, air and water.
7).High Transparency:Easy maintenance, absolute safely, visual inspection, low noise.
Advantage of PET bottle blowing machine
a. Servo driving and cam linking blowing section:
The unique cam linking system integrates movement of mold-opening, mold-locking and bottom mold-elevating in one movement. Equipped with high speed servo driving system which greatly shorten the cycle of blowing and increase the capacity. The complete movements of PET blowing only takes 2 seconds.
b. Small performs distance heating system
Heater distance in the heating oven is reduced to 38mm, compared with the conventional heating oven it saves more than 30% electricity consumption. Equipped with the air cycling system and redundant heat discharge system, it ensures the constant temperature of the heating zone.
c. Efficient and soft perform inlet system
By rotary and soft preform inlet system, the speed of prefom feeding is ensured meanwhile, the preform neck is well protected.
d. Modularized design conception
Adopting modularized design concept, to make it convenient and cost-saving for the maintenance and changing spare parts.
Type | KY4 | ||
Specifications of bottle | Mould number(piece) | 4 | |
maxi volume (mL) | 2000 | ||
maxi height (mm) | 328 | ||
maxi diameter (mm) | 105 | ||
Square bottle for max diagonal length (mm) | 115 | ||
preform Specifications | Suitable inner bottle neck (mm) | 20-25 | |
preform max length (mm) | 150 | ||
Capacity (bottles / hour) at 17 g 500mL | 7200 | ||
Electricity | Install power (kw) | 51 | |
Heating oven total power (kw) | 46 | ||
Heating oven actual power consumption (kw) | 26 | ||
Voltage / frequency (V / Hz) | 380v,50hz | ||
Allowed voltage fluctuation | ±10% | ||
HP Air | Pressure(bar) | 30 | |
Capacity(m³/min) | 4 | ||
Cooling Water | Mold water | pressure(bar) | 4-6 |
Suitable temperature range (ºC) | 6-13 | ||
Flow (L / min) | 45 | ||
Oven water | pressure(bar) | 4-6 | |
Suitable temperature range (ºC) | 6-13 | ||
Flow (L / min) | 22 | ||
Machine Specification | host machine dimension (m) length × width × height | 3.3*1*2.3 | |
Weight (Kg) | 3200 |
Home Products About Us News Solutions Video Contact Us Privacy Policy