After the bottle enters the host machine, it enters the bottle rinser through the transmission star wheel, and the bottle clamp clamps the bottle mouth and turns up 180° along the bottle flushing guide, so that the bottle mouth is downward. In a specific area of the rinser (determined by the water distribution plate - the rinse water is pumped into the water distribution plate by the rinse water pump, and then distributed to the rinse clamp by the water distribution plate through 24 pipelines), the rinse clamp nozzle is sprayed out Sterile water to rinse the inside of the bottle. After being rinsed and drained, the bottle is turned down 180° along the guide rail under the clamping of the bottle clamp, so that the bottle mouth is upward. The washed bottles are led out from the rinser through the transition steel dial (pure water rinse) and sent to the next process - filling.
2.Bottle filling part
When filling, the bottle is lifted by a cylinder, and the high-speed operation is stable and reliable. The compressed air is connected to the lifting cylinder through the air intake distributor. During operation, the compressed air is injected into the cavity A of the cylinder through the air injection pipe, so that the cylinder rises upward. After the bottle mouth rises, the filling valve is opened to start filling. When the filling set liquid level is reached, the air return port of the filling valve is blocked by the material, and the filling ends. Then the cylinder descends under the action of pulling down the cam, and the gas in the B cavity is exhausted through the exhaust screw at this time.
3.Bottle capping part
After filling, the bottle enters the capping machine through the transmission star wheel. The anti-rotation knife on the capping machine catches the neck of the bottle, and together with the bottle neck guard outside the capping machine, keeps the bottle upright and prevents rotation. The capping head revolves and rotates under the drive of the main shaft of the capping machine, and under the action of the cam, the capping, capping, capping, and capping actions are realized to complete the entire capping process.
The capping head adopts a magnetic constant torque device. When the capping head takes the cap through the capping disc, the top cover will hold the cap and straighten the cap to ensure the correct position of the cap in the capping mold and ensure the quality of capping. When the capping is completed, the capping head will slip against the magnetic force and will not damage the bottle cap. At the same time, when the capping head rises, the capping rod will push the cap out of the capping mold.
The capping disc transmits power to the capping head through the pin wheel to ensure that its movement is synchronized with the capping machine. The cap enters the capping disc through the capping channel, and then the cap transfer star wheel transfers the caps to the capping head separately according to the station. cover.
Home Products About Us News Solutions Video Contact Us Privacy Policy